Central Web Authentication on the WLC and ISE Configuration Example
Configure The first method of web authentication is local web authentication. In this case, the WLC redirects the HTTP traffic […]
LWA Process with the ISE Guest Portal
LWA Process with the ISE Guest Portal 1.The browser tries to fetch a web page. 2. The WLC intercepts the […]
DFS in RAP / MAP
DFS in RAP The RAP performs the following steps as a response to radar detection: The RAP sends a message […]
Cisco Prime Infrastructure – Configuring High Availability
An HA deployment consists of two Prime Infrastructure servers: a primary and a secondary. Each of these servers has an […]
Configuring VideoStream – Part 3 – Resource Reservation Control
Resource Reservation Control As more and more users begin to utilize video in the workplace on Wi-Fi endpoints, the ability […]
Configuring VideoStream – Part 2
VideoStream VideoStream provides efficient bandwidth utilization by removing the need to broadcast multicast packets to all WLANs on the AP […]
Configuring VideoStream – Part 1
Cisco Unified Wireless Network (CUWN) introduced a new feature, VideoStream, for enterprise wide deployments. This feature enables the wireless architecture […]
Optimized Roaming
The Sticky Client Problem: A client is referred as “Sticky” when it does not roam or move to a nearby […]
Receiver Start of Packet Detection Threshold (RX-SOP)
Receiver Start of Packet Detection Threshold Receiver Start of Packet Detection Threshold (RX-SOP) determines the Wi-Fi signal level in dBm […]
Cisco Prime Infrastructure 3.1 Quick Start Guide – Ports
Table 7 Ports Used by Prime Infrastructure and Assurance Port Protocol Direction Usage 7 TCP/UDP Server to endpoints Endpoint discovery […]