Cisco 9800 Wireless 2024 – Phase 3 LA Local

West Coast LA Local

hostnamela9800-1
!
line con 0 

logg sync
!


ip name-server 10.0.206.7
ip domain name netprojekralac.com
!

enable password Cisco123

!

user-name lab
 creation-time 1699425847
 privilege 15
 password 0 Cisco123
!

vlan 17
 name "WIRELESS-MGMT***
!
ntp server 10.0.0.4
!
wireless management interface vlan 17
!
interface Loopback0
 no ip address
!
interface GigabitEthernet1
 switchport trunk native vlan 17
 switchport mode trunk
 negotiation auto
 no mop enabled
 no mop sysid
 shutdown
!
interface GigabitEthernet2
 switchport trunk native vlan 17
 switchport mode trunk
 negotiation auto
 no mop enabled
 no mop sysid
!
interface Vlan1
 no ip address
 shutdown
 no mop enabled
 no mop sysid
!
interface Vlan7
 ip address 10.0.17.2 255.255.255.192
 no mop enabled
 no mop sysid
!
!
ip route 0.0.0.0 0.0.0.0 10.0.17.1
!
wireless mobility group name LA-LOCAL-MOBILITY-DOMAIN

!
*************************************************************************************
Configure the wireless trustpoint - only required on the Cisco 9800-CL

wireless config vwlc-ssc key-size 2048 signature-algo sha256 password 0 Cisco123
!
wireless rf-network LA-LOCAL-RF-GROUP

!

See the steps on configuring HA here

Verify that the WLC pair is in HA

By default, console access to the standby WLC is disabled.

Enable the console

Verify IP reachability between LA WLC > West and East WLCs



la9800-1#ping 10.0.0.18
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.18, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/10 ms
la9800-1#ping 10.0.48.48
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.48.48, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
la9800-1#

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.