Configuring VideoStream – Part 1
Cisco Unified Wireless Network (CUWN) introduced a new feature, VideoStream, for enterprise wide deployments. This feature enables the wireless architecture […]
Cisco Unified Wireless Network (CUWN) introduced a new feature, VideoStream, for enterprise wide deployments. This feature enables the wireless architecture […]
The Sticky Client Problem: A client is referred as “Sticky” when it does not roam or move to a nearby […]
Receiver Start of Packet Detection Threshold Receiver Start of Packet Detection Threshold (RX-SOP) determines the Wi-Fi signal level in dBm […]
Table 7 Ports Used by Prime Infrastructure and Assurance Port Protocol Direction Usage 7 TCP/UDP Server to endpoints Endpoint discovery […]
Run the following command to reset PI root GUI password vprime3one/admin# ncs password root password password!ha
To prevent attacks using broadcast frames, access points supporting CCXv5 will not emit any broadcast class 3 management frames (such […]
Wireshark packet capture – logic Request Identity Identity Response Request TLS EAP I’m doing EAP-PEAP Client hello Server hello cert […]
Intersubnet Roaming – This figure shows intersubnet roaming, which occurs when the wireless LAN interfaces of the controllers are on […]
Intercontroller Roaming – This figure shows intercontroller roaming, which occurs when the wireless LAN interfaces of the controllers are on […]
When the wireless client moves its association from one access point to another, the controller simply updates the client database […]