Cisco 9800 Equivalent of AireOS webpass through – notes
This lab will demonstrate how to configure a simple web passthrough on the IOS XE 9800 Controller AireOS web passthrough […]
Author: 80211 80211
CCIE Enterprise Core – ENCOR 350-401 – Network Device Communication – Packet Routing
Verify the ARP table of each device PC1 R4 R6 PC2 The primary function of a network is to provide […]
Cisco 9800 Flexconnect QoS – WIFI CALLING – Part 2
First and foremost read this …. https://tools.ietf.org/id/draft-ietf-tsvwg-ieee-802-11-05.html. Then this … https://tools.ietf.org/html/rfc4594 wireless packet capture with omnipeek /wireshark / SSID open […]
Cisco 9800 Flexconnect QoS – WIFI CALLING – Part 1
First and foremost read this …. https://tools.ietf.org/id/draft-ietf-tsvwg-ieee-802-11-05.html. Then this … https://tools.ietf.org/html/rfc4594 wireless packet capture with omnipeek /wireshark / SSID open […]
Cisco 9800 (17.1)HA via Nexus 9K vPC
Nexus Config – 9K1 vlan 1,10,20vlan 10name NETWORK_MGMTvlan 20name WLAN_MGMT spanning-tree vlan 1-3967 priority 24576vrf context managementvpc domain 1peer-keepalive destination […]
Cisco 9800 High Availability on IOS XE 17.x – notes
Information About High Availability High Availability (HA) allows you to reduce the downtime of wireless networks that occurs due to […]
Slowly working my way through INE’s CCIE R&S workbook
Eve-ng Physical Topology
Spanning-tree Communication – Bridge Protocol Data Units (BPDU)
Because STP is involved in loop detection, many people refer to the catastrophic loops as “Spanning Tree loops.” This is […]
Spanning Tree Basics – Part 3
Spanning-tree from the view point of DL-1 and DL2 The interface associated to lowest path cost is more preferred. The […]
Spanning Tree Basics – Part 2 – The STP root
In part one we looked at the simplest spanning tree decision that a switch can make when it has a […]