WLAN – DMZ Logic
Switch6 C9800L-Internal ASAv-Internal SW100 WLAN_DMZ_SWITCH 9800DMZ ASAv-External Test ICMP and SSH connectivity between the internal and DMZ WLCs Allow ICMP […]
Category: Cisco 9800 Wireless
Cisco 9800 Wireless 2024 – Phase 11 – Version 17.12.02 Bulk Bulk AP Provisioning
Version 17.12.02 makes it easier to provision APs with primary, secondary, and tertiary controllers.
Cisco 9800 Wireless 2024 – Phase 10 – Upgrading to 17.12.2
Before you begin Clean up the old installation files Copy the new image to flash Verify that the file was […]
Cisco 9800 Wireless 2024 – Phase 9 -FlexConnect Logic & Testing
Testing and verification are based on the following basic configuration found here. Verification of VLANs & VLAN IDs Verification of […]
Cisco 9800 Wireless 2024 – Phase 8 – WLC and AP (Local/Flex) Redundancy Planning – Part 2
Basic Connectivity Configuration. The configuration workflow is as follows Create a PSK WLAN to test basic connectivity Create the Policy […]
Cisco 9800 Wireless 2024 – Phase 8 – WLC and AP (Local/Flex) Redundancy Planning – Part 1
Cisco 9800 VPC on Nexus Cisco 9800 HA on 17.X Cisco 9800-CL HA Configuring a highly available wireless network requires […]
Cisco 9800 Wireless 2024 – Phase 7 – AP Authorization List
Security Requirements: All Cisco access points must be authorized locally to join the Cisco 9800 WLC. Background Information To authorize […]
Cisco 9800 Wireless 2024 – Phase 6 – CLI Login Banners
Note: When HTTP authentication is configured using TACACS+/RADIUS, the banner message does not display on the Web UI. The login […]
Cisco 9800 Wireless 2024 – Phase 5 – Creating and Installing Certificates With SAN
Problem Resolution Retrieve the CA in base64 format Right click on the .cer file and open with a text editor […]
Cisco 9800 Wireless 2024 – Phase 4 – DNS & TACACS+ Device Admin
Add DNS entries for the Cisco 9800 Controllers Add the Cisco 9800 Controllers to Cisco ISE Configure the ISE TACACS+ […]