Cisco 9800 Equivalent of AireOS webpass through – notes
This lab will demonstrate how to configure a simple web passthrough on the IOS XE 9800 Controller AireOS web passthrough […]
Category: 9800 Flexconnect
Cisco 9800 Flexconnect QoS – WIFI CALLING – Part 2
First and foremost read this …. https://tools.ietf.org/id/draft-ietf-tsvwg-ieee-802-11-05.html. Then this … https://tools.ietf.org/html/rfc4594 wireless packet capture with omnipeek /wireshark / SSID open […]
Cisco 9800 Flexconnect QoS – WIFI CALLING – Part 1
First and foremost read this …. https://tools.ietf.org/id/draft-ietf-tsvwg-ieee-802-11-05.html. Then this … https://tools.ietf.org/html/rfc4594 wireless packet capture with omnipeek /wireshark / SSID open […]
Quality of Service (QoS) on Catalyst 9800 Controller – Basics (rough notes place holder)
Define class maps Class Map match-any DROP-NETFLIX1_AVC_UI_CLASS (id 39) Description: DROP-NETFLIX1_AVC_UI_CLASS UI_policy_DO_NOT_CHANGE Match protocol netflix Class Map match-any DROP-NETFLIX2_AVC_UI_CLASS (id […]
Upgrading Cisco 9800 Controllers
Be sure to complete the following prerequisites before upgrading the Cisco IOS XE version of the controller software image: Compatibility […]
Cisco 9800 TACACS+ Config CLI and verify – notes
Define the TACACS+ source interface. The source interface is usually the management interface. ip tacacs source-interface VlanX 2. Enable aaa […]
CCIE Enterprise Wireless (v1.0) – Enterprise Wireless Network – Client troubleshooting – Part 1 – Flexconnect
Client connecting to 9800 Cloud controller with local switching. Issue, client cannot obtain an IP address. SSID = vFLEXCLOUD , […]
CCIE Enterprise Wireless (v1.0) – Enterprise Wireless Network – Wireless segmentation with profiles and groups – 3.4.c Flex groups
In Cisco IOS XE Software, Version 16.12.01s – 9800 Wireless controllers there is NO longer an option to place an […]