Configure sever parameters – server IP, protocol, file location , file name. Select the cluster of devices to be upgraded.
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/00-6-1024x524.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/1-3-1024x487.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/2-4-1024x292.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/3-4-1024x427.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/4-8-1024x573.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/5-10.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/6-6-1024x388.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/7-5.png)
Verify that the AP is still up and the client is still connected
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/8-4-1024x544.png)
Continuously verify the upgrade status:
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/9-8-1024x575.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/10-8.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/12-4.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/11-3-1024x272.png)
lc-cluster state as the controllers are being upgraded:
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/13-4-1024x429.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/14-4-1024x457.png)
verify upgrade status
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/15.png)
show switches on the mobility master
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/16-1024x252.png)
verify status of the client – client continuously connected while running ping to the internet:
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/17-2.png)
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/20-1-1024x638.png)
Verify cluster status after the upgrade
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/18-1024x530.png)
Verify status of the code upgrade:
![](https://www.netprojnetworks.com/wp-content/uploads/2019/12/19-1024x479.png)
next blog post to cover RF/radio settings…